Sign In

A successful Kibosh Light setup requires the following three items:

  1. Subscription Status: active
  2. Kibosh DNS Server IP
    • These go on your WiFi gateway router.
  3. A Kibosh Browser-Agent installed on at least 1 PC

Detailed step-by-step Kibosh Light setup instructions found at Support-Center.

Skip to FAQs

Watch Kibosh Light Setup video

Kibosh Support Options

How to get Started:

  1. Watch the Kibosh Light Setup video below
  2. Watch the Kibosh Light Setup video below
  3. Log into your Kibosh Portal
    • Go into the DNS section
    • Write down the Server IP
    • This is the hard part – put these Server IP on your WiFi router (as shown in the Setup Video)
  4. Log into your Kibosh Portal
  5. Go to test.kibosh.com – you should get Success!
    • Open the browser-agent should say KiboshDNS-ON

.

Kibosh Light setup video – and then you’ll know (1:38m):

For step-by-step Installation & Troubleshooting go to Kibosh.com/Support

Kibosh Support-Center

Back To Top

Kibosh Light FAQ

Scenario: you have installed a Kibosh browser-agent, and validated your DNS ID.

But the browser-agent shows KiboshDNS-OFF & your internet is still unprotected. 

Solution: the KiboshDNS-OFF error = you have not put Kibosh DNS Server IP on your WiFi router yet, or if you did you missed something.

Please read again - you have not put KiboshDNS Server IP (as shown in your Portal > DNS tab) on your WiFi router yet. This is where you need to focus your efforts.

You can confirm this by assigning one or both of the KiboshDNS Server IP onto your local PC.

Then click Update in the browser-agent (installed on this PC), and KiboshDNS-ON will turn on, and test.kibosh.com will Success!

...because the local host is using a KiboshDNS server(s) and so the Internet is family safe (on this PC).

Once you confirm it's not a Kibosh issue, re-trace your steps with How to get Started, and work on Step #5 'Put these server IP on your WiFi router'

Get Support:

Schedule a Live Support session.

Catch someone on Live Chat at Kibosh.com

If you need remote assistance - install the TeamViewer Quick Support agent and have your ID and Password ready.

They are listed on your Kibosh Portal > DNS tab:

 

It means one of your Kibosh browser-agent needs to be Updated.

On a PC with a Kibosh Browser-Agent installed (we recommend installing more than one) click Update

Chrome / Brave: Chrome Web Store

FireFox: FireFox Add-ons

Microsoft Edge: Edge Add-ons

NOTES:

  1. You can install multiple Browser-Agents on the same PC - just use the same Account DNS-ID & Password.
  2. You can install them on laptops that change internet connections often.

Using the same Kibosh Portal account you're using now...

  1.  Go to Account > Subscriptions and cancel all Kibosh Light
  2.  Go to Kibosh.com and order a new MT6000 (use coupon dns2025 for 15% off)
  3.  When you have your MT6000...
    1. Install the MT6000 (quick setup guide)
    2. From your Kibosh Portal > Account > Activation
    3. Choose Kibosh Pro
    4. Enter your MT6000 unique Router ID
    5. Complete checkout

You should now be looking at your Kibosh Pro HUD with full control over your network / internet.

Your Spectrum modem / router will work - but only if you can disable IPV6. 

Some Spectrum customers have reported that they cannot (i.e., Spectrum will not allow) disable IPV6 - and IPV6 allows a back-door patch to a raw internet. So although Kibosh Light servers have been correctly set on your Spectrum modem/router...your Internet will remain open.

Solution: purchase your own WiFi router.

How it works: The new WiFi router will attach to the Spectrum. You will then start using the new WiFi router for Internet access, and you can set Kibosh Light without issue.

Some examples of WiFi routers:

These are a few WiFi routers I have experience with and I know are reliable.

But you have lots of options in regards to WiFi routers - any of them will work with Kibosh Light.

 

Back To Top