Preface: how to find your gateway, i.e. router IP. 1. Connect to the Management Interface. Connect to the LSM with Firefox/Internet Explorer using an IP address of any of the IP Interfaces.    Example URL: https://192.168.1.254 2. Login to the Firewall. Login to the firewall as a user with administrative privileges. 3. Click DNS under Configuration to change DNS settings. 4. Type in Kibosh Shield addresses in DNS Server 1 and DNS Server 2 fields. Please write down your current DNS settings before switching to Kibosh Shield, in case you want to…

  This article is to assist with setting up Kibosh Shield on a TP-Link CR700 router. The original manual for this router can be found here: http://www.tp-link.com/res/down/doc/Archer_CR700_V1_UG.pdf Step 1. Type http://192.168.1.1 into your preferred web browser. NOTE: You will need to log in to access the router settings. The default login information can be found below. Username: admin Password: admin Step 2. Click on the Advanced tab located on the right side of the screen. Step 3. Navigate to LAN settings…

  The Kibosh Router N600 and Archer C7 ship with 2.4Ghz wifi on by default. However they both have 5Ghz capability which can be enabled. Q: What’s the difference between 2.4G and 5G? A: 2.4G has much more range than 5G, but doesn’t carry as much data. For example, if you are downloading, or moving a large file 5G will be faster. However for most applications (streaming video, multiplayer games, etc) 2.4G works fine. You will use 2.4G most of…

  How to create an Internet access time rule from the MyFilter Dashboard: Video: How to schedule Internet access times.  From your MyFilter Dashboard go to Manage Device > Schedule Internet Access  First option = Choose what device(s) this rule will be applied to:  Block All Hosts = turn the Internet off for everyone.  Block Only The Following Hosts = turn the Internet off for this device only. ** Choosing this option will display a list of connected devices to choose…