Log into router / modem at http://192.168.0.1 Go to Advanced Settings (screenshot 1) WAN Settings Set DNS Servers allocated with DHCP requests. Select Custom Servers Enter Primary and Seconday Kibosh DNS servers. (screenshot 2) Apply Reboot your PC to clear local caches. Go to www.info.com and search for ‘abcd1234‘ – if Kibosh is protecting your network you will receive the Kibosh Success page. Screenshot 1 Screenshot 2
A nice feature of the Kibosh appliance is the ability to schedule the wireless network to shut off at night. This solves two potential issues: A quick and easy to way to prevent unauthorized use of the Internet after pre-determined times. Stops unnecessary exposure to wireless radiation, if that’s a concern for you. How to schedule WiFi access: When connected locally log into the Kibosh appliance at http://192.168.10.1 Go to System > WiFi Schedule You can schedule daily, or…
Go to My Connected Home. Then click on Action > Edit on the Broadband Connection (DSL). From there go to Action > Edit on the VCs > PPPoE (image 1). Under PPPoE settings change DNS Primary and DNS Secondary from the default to the Kibosh DNS Servers (image 2). Click the ‘Apply’ Button. Now to go www.info.com and search for abcd1234 to verify the filter is working – you should receive the Kibosh Success page. NOTE: If you do…
Access the router’s browser-based utility. Open a web browser and enter http://192.168.1.1, http://192.168.0.1, http://192.168.1.1, or http://192.168.1.1, depending on the individual configuration. Log into the browser-based utility. The default username is “admin” and the default password is “admin”. Choose the WAN menu under Advanced Settings on the left hand side. Under WAN DNS setting, enter the Kibosh Cloud DNS servers NOTE: Confirm that your LAN DNS server is not set. Do not configure Kibosh Cloud here! Test your settings >…
Arris routers (often co-branded with Motorola) such as Surf Boards are typically distributed from Internet providers (ISP). Many of these routers have been modified such that their DNS settings cannot be modified which would make them not be able to be configured for Kibosh Cloud. If your Arris router was supplied by your Internet Provider (i.e. Comcast, Time Warner), you may need to confirm with the provider if their device supports setting the DNS settings on the router. The…
-Return- Launch the AirPort Utility. The AirPort Utility can be found in the Utilities folder within your Applications folder. Select your Airport Base Station. Some users have multiple Airport Base Stations, select the one you wish to configure. Enter the configuration menu for the Airport Base Station. Click “Edit.” Change the configuration settings. Click “Internet” to configure your router’s internet settings. Enter the Kibosh Cloud DNS servers. Click on advanced or additional settings and uncheck Enable IPv6 Connection Sharing.…
Launch the AirPort Utility. The AirPort Utility can be found in the Utilities folder within your Applications folder. Select the Time Capsule you wish to configure. Enter the configuration menu for the Time Capsule Base Station. Click “Edit.” Change the configuration settings. Click “Internet” to configure your router’s internet settings. Enter the Kibosh DNS servers (noted in your setup guide). Save your settings. Click “Update” to apply your settings. NOTE: Kibosh Cloud will not work if the Time Capsule…
1. Visit the router’s IP address (http://192.168.0.1) in a new browser window. If you are attempting to configure a D-Link router, take note of your computer’s Default Gateway IP address. The Default Gateway is the IP address of the D-Link router. By default, it should be 192.168.0.1. Most D-Link devices use the 192.168.0.X range. How to find your Default Gateway. 2. Enter the router password. Note: if you have not changed the original settings, the default username is admin and the password…
Log into the Verizon router, usually found at http://192.168.1.1. or http://192.168.0.1, if neither of those work see how to find my router’s address. Go to my network Network connections Select the broadband link Settings set DNS to ‘use the following dns server addresses Enter Kibosh Cloud’s DNS servers Apply Now go to www.info.com and search for ‘abcd1234’ to confirm Kibosh filtering is active ( you should receive a Kibosh Success message).
An excellent router to use with Gargoyle is the TP-Link Archer C7 router ($90.00). How to flash a TP-Link Archer C7 V2 with Gargoyle firmware, and enable Kibosh Cloud. Flash the Archer C7 with the LEDE firmware which you can download from here. LEDE is a fork of OpenWRT. Once you get LEDE installed download the Gargoyle firmware from here. Upgrade to the Gargoyle firmware from within LEDE. Log into the Archer C7 router, now running LEDE. At this…
