How to Guides Archives – Page 7 of 7

How to reset to factory.

August 4, 2017

Resetting to factory will resolve many intermittent wireless and / or slow performance issues that you may be experiencing. If resetting to factory does not resolve your issues then let us know and we’ll initiate the hardware replacement process. NOTE: If you are able to log into the KRMU admin panel (http://192.168.10.1) then you could upgrade the firmware in lieu of resetting to factory as it will do the same thing. How to reset to factory Kibosh Cloud Hold…

How to troubleshoot empty logs.

August 4, 2017

Scott

How to Guides

If your daily activity report looks like this: then your WAN IP is not being registered with Kibosh’s servers. Troubleshooting: Kibosh for Android Reboot the device, or re-open the Kibosh DDNS app. Kibosh Router / 360 / Pulse Restart the device. Then log into your MyFilter Dashboard and monitor the Status – when the device shows as Online, the logs will be populated. If after an hour or so Status does not show Online: Connect to the Kibosh appliance…

How to read the Daily Internet Activity Report.

August 4, 2017

Scott

How to Guides, Web Filter Settings

The Kibosh Daily Global Activity Report (DGAR) is delivered to your email daily, and will give you a daily snapshot of all Internet activity for your network within a 24 hour period. DGAR can be enabled / disabled from your Myfilter Dashboard > Web Filter > Options. DGAR can be enabled / disabled for all Kibosh products. DGAR shows all Internet activity for your entire network, but is not device specific. For device specific logs you 1) need to…