How to setup Eero Mesh with Kibosh #

1. 1. Turn off all Eero APs
   2. Take the Eero’s Main AP, and attach it to an open Kibosh MT6000 LAN port with an Ethernet patch cable
   3. Now put the Eero Main AP into Bridge Mode:
      • How to bridge your Eero
        1. Install the Eero app
        2. Create a Eero network: ‘The WiFi Name You Want to Use’
           • NOTE: the Kibosh Portal WiFi name cannot be the same as the Eero
        3. Tap the Settings tab.
        4. Tap Network settings.
        5. Under Network services, select DHCP & NAT.
        6. Switch your selection from Automatic to Bridge.
   4. Power cycle both the MT6000 and Eero Main AP
   5. There should now be two WiFi networks available:
      1. Kibosh
      2. ‘The WiFi Name You Want to Use’
   6. Log into your Kibosh Portal > Advanced > Settings > WiFi Settings and turn off both Kibosh 2.4 and 5g WiFi
      • Save Changes
      • NOTE: You do not have to turn them off, but the Kibosh’s WiFi name cannot be the same as the Eero.
   7. There should now be one WiFi network available: ‘The WiFi Name You Want to Use’
   8. Connect all additional Eero range extenders as normal.